blackfire crystal coat paint coating problems

I managed to remove it with Flex, Menz 4000 and black hybrid. If the coating is not fully cured yet, like when you make a mistake afterwards and manage to scratch it (I already dit it), LC CCS black or something similar along with a less abrasive polish will do it. You might want to post a closeup pic of your paint and we can suggest what might be needed. Then clean the paint prior to application with a paint prep fluid (Blackfire offers it in the kit). I will be reapplying another coating in a few weeks. Unfortunately the body shop working on my Touareg took aweful care of it when it was there for 2 weeks. I am not sure if BlackFire would need more or less, but after a year depending on how you care for your paint you might need to remove imperfections anyways. It took several passes with Menzerna FG400 with Uber Orange (medium cut) pad. I just removed an SIo2 based coating from my Touareg this weekend. Would like to do this coating but want to make sure I know what to expect on the end of life side of it. I have only used wax or sealant (Sonax PNS) so I have used Prep All to prep the paint. Can any kind of polish be used? Could it be a finishing polish or does it need more cut? Will one pass with a DA be enough? Does the pad have to have some cut to it? Can it be like a LC CCS black? Sorry for the questions. I guess what I was wanting to know was how much do you have to polish. Other than that all you need to do is wash the vehicle with a quality shampoo, and be sure to use quality wash mitts and drying towels. If you like to constantly touch the paint, then consider applying a coat of Crystal Seal every couple months. If you're not happy with the quality of the finish after a year, then you need to re-evaluate how you're maintaining the finish once you've coated it. polishing the whole thing off and starting over.\ I also wonder if you're satisfied with the condition of the paint at the one year point if you could clean/prep the surface with a non-abrasive product and just throw down another layer of the coating vs. Most of the coatings folks talk about there are new or applied to a customer's car, so there isn't a good opportunity to talk about end-of-life of these products. Great questions and I wondered the same thing. To re-apply simply wash, clay, polish, and prep the paint. Or will the coating just disappear and all you need to do is to maybe use the prep then apply the coating again without having to polish again?Īs the coating wears off the gloss and beading will diminish. How do you remove it to recoat again? Does it have to be polished and how do you know you have all of the coating off and not taking off more clear coat? Will something like Prep All work? How do you know when the coating has reached it's limit? Lack of beading? Does it change color, yellow? The questions I have are regarding what happens later, 2 years down the road. Layering is not beneficial - apply one coat and you're good to go.Įraser might work for some people, but I personally prefer to stick with each manufacturer's recommended procedure for prepping the surface, so in this case Crystal Coat Paint Prep is the preferred way to prep the paint prior to applying the coating. Optiguard recomends no more than 3 layers or clarity will be an issue.Ĭrystal seal will be used as a maintence coating.? Can Eraser be used as final wipe down step or do you need to be brand specific before coating is applied.? Just trying to get best results first time around.

Is this product layerable if so how long after the first application before adding the second coat.

The only reason to apply Crystal Seal is because you can't stand NOT to touch your paint. You can apply Crystal Seal within a day or two, but it's not necessary. Any excess product (ie: 'high spots') are easily leveled using a microfiber towel. The coating essentially 'melts' into the paint as you apply it. I apologize for the late reply, I was on vacation and yesterday was my first day back in the office. I am excited to see the results this coating provides If this is true how long after application of the coating must i wait before topping with crystal seal? Can i apply a second layer of the coating instead of topping with crystal seal? Thanks for your help. It is also my understanding that this coating should not be topped with anything but crystal seal. Is this the proper procedure for leveling the coating? Are there any videos that you recomend that accurately show the process? When knocking down the high spots it appears as if the residue is completely removed by buffing with a mf towel. I have not applied a coating before, in prep for applying this i have watched several videos of cquartz. I have a few questions reguarding the application of crystal coating.

Blackfire crystal coat paint coating problems